Kwik-Fit Technical Information
Below are the beam load information for the use of the Kwik-Fit fittings.

BEAM LOAD TABLE ( lb )
FITTING	Size 32	Size 40
SIZE OF PIPE	1¼" N.B.	1½" N.B.
GRADE OF MATERIAL	SCH. 40	SCH. 40
SPAN			SPAN
1'	5516	7669	1'
2'	2758	3834	2'
3'	1838	2556	3'
3' 6"	1576	2191	3' 6"
4'	1379	1917	4'
4' 6"	1226	1704	4' 6"
5'	1103	1534	5'
5' 6"	1003	1394	5' 6"
6'	919	1278	6'
6' 6"	849	1180	6' 6"
7'	788	1096	7'
7' 6"	735	1023	7' 6"
8'	690	959	8'
9'	613	852	9'
10'	551	767	10'
Table reflects a safety factor of 1.67:1

Upright Load Table
FITTING	Size 32	Size 40
This table gives an indication only of the safe load, in lbs., that may be carried between the above restraints by single Schedule 40 pipe, 30000 PSI, when used as uprights. Loads listed under 'A' columns refer to those loads that are obtainable according to schematic 'B'. Schematic 'B' details a racking system that is mechanically affixed to the surface on which it stands, whereas Schematic 'A' details a free-standing racking system. Recommended screw torque: 29 lbs./ft.
UPRIGHT LOAD TABLE ( lb )
FITTING	Size 32		Size 40
SIZE OF PIPE	1¼" N.B.		1½" N.B.
GRADE OF MATERIAL	SCH. 40		SCH. 40
Length	A	B	A	B	Length
1' 0"	4445	4635	5238	5403	1' 0"
1' 3"	4213	4445	4955	5235	1' 3"
1' 6"	3875	4213	4650	4955	1' 6"
1' 9"	3630	3948	4395	4730	1' 9"
2' 0"	3335	3715	4138	4500	2' 0"
2' 3"	3048	3470	3883	4268	2' 3"
2' 6"	2753	3273	3570	4003	2' 6"
2' 9"	2505	2993	3243	3730	2' 9"
3' 0"	2170	2703	2985	3523	3' 0"
3' 3"	1993	2563	2698	3283	3' 3"
3' 6"	1810	2283	2418	3083	3' 6"
3' 9"	1643	2085	2250	2858	3' 9"
4' 0"	1488	1938	2065	2603	4' 0"
4' 3"	1313	1783	1880	2393	4' 3"
4' 6"	1215	1643	1698	2225	4' 6"
4' 9"	N/A	1488	1560	2098	4' 9"
5' 0"	N/A	1363	1450	1920	5' 0"
5' 3"	N/A	1270	N/A	1785	5' 3"
5' 6"			N/A	1698	5' 6"
5' 9"			N/A	1520	5' 9"
6' 0"			N/A	1450	6' 0"
					6' 3"
					6' 6"
					6' 9"
					7' 0"
					7' 3"
					7' 6"
Table reflects a safety factor or 2:1